Double-sided Planer Series M450C

Short Description:

Double-sided Planer Series M450C can simultaneously cut two planes opposite to the small-diameter wood while achieving the same thickness and smooth veneer. 450mm working width is suitable for normal workpiece processing. Furthermore, magnetic grid sensor for thickness display, the accuracy is much higher than proximity sensor.


Product Detail

Specification

Video

Product Tags

Applications

HJD-M2045B can simultaneously cut two planes opposite to the small-diameter wood while achieving the same thickness and smooth veneer.

Features

1. Piano key type pressure mechanism with safety guard for maximum safety.
2. Pressure pieces can be individually adjusted.
3. Taiwan Shilin Inverter for adjusting speed. Fast and smooth planing.
4. Ruggedly constructed machine frame gives superior operation stability.
5. Large, heavy table and base for solid support of stock. Table surface is precision ground.
6. Rugged, 3-knife cutterhead is precision ground and dynamically balanced for smooth cutting.
7. Anti-kickback fingers provided at Infeed side prevent stock kickback.
8. Front and rear table rollers provide added smoothness of stock feeding.

Taiwan-spiral-cutter

Taiwan heavy cut 6PCS spiral cutter

maintenance-free-reducer

Use maintenance-free reducer

short-material-feeding-guide

Min. processing length of short material guide is 150mm

Inverter-speed-control

Feeding adopts frequency adjustment, the feeding speed can be adjusted according to the hardness of wood.

proximty-sensor

The proximity sensor for thickness display is used to control the motor and stop by inspecting rotation circles of motor to ensure adjustment of precision.

imported-digital-display

The product is provided with imported digital display device. which can be operated directly to processing thickness from operating panel with the accuracy up to 0.05mm;besides, upper and lower planning motor is provided with ammeter for visual observing if it is over loaded while working.

Introduction

Introduction:Equipped with a piano key type pressure mechanism and a safety protection device, the M450C guarantees a secure and worry-free operation. You can adjust the pressure piece individually, allowing for precise control over the planing process. Additionally, the inclusion of a Taiwan Shihlin frequency converter enables fast and smooth planing, delivering impeccable results every time.

The solid frame structure of the M450C provides exceptional stability during operation, ensuring a seamless and accurate workflow. The large and heavy workbench and base offer a sturdy foundation and solid support for your inventory, while the precision-ground countertop enhances the overall accuracy of your work.

Featuring a durable 3-knife cutterhead, meticulously precision ground and dynamically balanced, the M450C ensures smooth and precise cutting. To enhance safety during operation, anti-recoil fingers are provided on the feed side, preventing stock recoil and ensuring a secure working environment. Moreover, front and rear working table rollers facilitate smooth feeding, ensuring seamless operation throughout the entire process.

The Double-sided Planer Series M450C incorporates the ability to simultaneously cut two planes opposite to small-diameter wood, achieving consistent thickness and a smooth veneer effortlessly. The generous 450mm working width makes it suitable for normal workpiece processing, meeting the demands of various woodworking applications.

To further elevate precision and accuracy, the M450C features a magnetic grid sensor for thickness display. This sensor ensures a much higher level of accuracy compared to traditional proximity sensors, enabling you to achieve precise and error-free results with ease.

FACTORY IMAGES

Four-side-planer-workshop-1
four-side-planer-workshop-4
four-side-planer-workshop-3
four-side-planer-workshop-5
four-side-planer-workshop-2
four-side-planer-workshop-6

Our Certificates

Leabon-certificates

  • Previous:
  • Next:

  • Model NO. ZG-M450C
    Max.Working Width 450mm
    Max.Working Thickness 150mm
    Min.Working Thickness 12mm
    Min.Working Length 320mm
    Cutter Knife 2x72pcS
    Spindle Rotation Rate 4500r/min
    Feeding Speed 5-20m/min
    Top Spindle Power 7.5kw
    Bottom Pindle Power 5.5kw
    Feeding Motor Power 2.2kw
    Elevating Motor Power 0.37kw
    Total Power 15.57kw
    Overall Dimensions 2350x1268x1680
    Write your message here and send it to us